Principle concrete mixer

mobile block making machine,twin shaft concrete mixers for sale,mobile batching plant for sale,

Mixing materials to make a strong flow and complex trajectories

So that between the particles have a greater relative speed

Collision and squeeze and cause greater friction shear mixing equipment mixer mixer mixer dispersed emulsion machine emulsifying machine

Quality concrete mixers stirring

Concrete mixer while stirring should pay more attention to its mixing quality.

In order to ensure the quality of concrete stirring, requires concrete mix Stir, mixing time is short, fast discharge, less residue, low power consumption and less pollution. The main factors affecting the quality of the concrete mixer mixing are: structural form of mixing equipment mixer mixer mixer mixer dispersed emulsion machine emulsifying machine, mixer and mix feed tube geometry capacity volume ratio of the feed mixture and feeding program position, the stirring blades configuration and geometry of the arrangement, the stirring speed and blade liner wear status.

Concrete Mixer rules:

1, the mixer should be placed in a solid place, with a creel stand or legs steady. Allowed to replace the tire support.

2, before starting the mixer should check the controller and parts is good. It shall be a foreign body in the drum.

3, stirring mixer into the hopper raised when the device mixer mixer mixer dispersed emulsion machine emulsifying machine, strictly prohibited in the hopper through or staying. After the work is completed shall be fixed mixer hopper.

4, the mixer running, prohibited the tool inserted into the inner cylinder.

5, site maintenance, should be fixed mixer hopper off the power. When entering the mixer drum, outside should someone custody.

Screening of key technologies mixer

Screening of key technologies mixer (1) transmission of raw materials twin shaft compulsory concrete mixer, processing and production: raw materials chosen transmission components it has strength and hardness should be moderate, no need too big, but not too small, to avoid excessive waste, The structure of the form should be simple to minimize body parts production processing difficulty, as many parts of the selection of national standards, to facilitate post of maintenance and replacement. (2) the structure of the overall layout of concrete mixers: concrete mixer, mainly through the support frame and put the stand on a level surface run job, so the overall height of the concrete is not too high, in order to ensure a smooth working mixer layout structure is also due may reasonably compact and easy to use. (3) noise and dust control: To reduce the noise concrete block making machine supplier, dust and the impact of the work environment and pollution, we have the appropriate cylinder above the concrete mixer fitted with a cylinder cover, though not eliminate noise pollution and ash layers concrete batching plant, However, to reduce noise and dust reduction was able to play a very good effect. (4) Safety: Make sure that the mixer under normal operating use, does not cause harm to human health.