to ensure the quality and reassurance, suggestions also need to check on an important node construction. On the strengthening of the acceptance of the floor we are divided into two aspects of acceptance and acceptance of the surface layer. First look at the strengthening of the ground floor of the acceptance of the main points. 1, to strengthen grassroots clean ground floor pavement, the ground need to clean,

to ensure that no dust, no construction waste. 2, the ground moisture content should pay attention to strengthen the floor before the pavement, the ground should be achieved or lower than the local equilibrium moisture and moisture content, is strictly prohibited wet construction. And to prevent water leakage to the ground, such as heating water, kitchen and bathroom interface, etc..

General cement ground moisture content should be less than 2% (belong to the geothermal system should not be higher than 1.5%), wood floor should be 6%-10%. 3, the ground roughness requirements according to the requirements, the ground in the pavement, including the strengthening of the floor, including the wooden floor, the ground roughness should be achieved with 2m by the foot of the test should be less than 5mm. If the ground is uneven, you need to use tools to chisel, it is best to use self leveling treatment, to ensure that the ground should not be caused by the formation of the ground floor after the installation of the collapse of the edge, from up and other quality problems.

Best WPC Supplier | Composite Deck | Seven Trust
cost pool deck Seven Trust in Norway
3 foot fence panels
seven trust decking boat flooring