Stenter machine can be defined as a stente finishing process in which the open width form of the fabric is treated to set up the required width, weight, and fabric texture as per customer’s specification. Here knitted and woven fabric in open width form is treated. This multipurpose machine is used for the following purposes:

Drying

Heat setting

Width control

Curing

Finishing chemical application

Selvedge printing

Uniform moisture control for pad batch dyeing

Loop control

Weft straitening

Pigment dye application

Any thermo fixation

Padding mangle

Here finishing like OBA treatment, dry-cross finish, moist cross finish, wrinkle free finish, easy care finish can be done along with width and shrinkage control.

Working Procedure

Continuous drying is done in a stenter frame by convection. Blowers impinge hot air on both the top and bottom of fabric as the fabric passes through the chamber of the machine. Its frames are equipped with an endless chain on each side to grip the fabric by both selvages as it enters chamber. The distance between the chains can be increased or decreased. In every chamber there are burners and blowers. The temperature of each chamber can be controlled individually. The fabric gripping in stenter, two systems are available:

Clip to grip coarse fabrics like twill fabric.

Pin to grip fine fabric.

The Licheng Stenter gives you a wide range of options to let you be able to process the fabric the way you like it. Licheng Stenter is fully produced in China, and features the latest in technology.Click the https://www.hotairstenter.com/product/hot-air-stenter.html for extra information on Hot Air Stenter and Flat Screen Printing Machine Manufacturer