A lot of customers to buy the emulsifier will ask the way of maintenance of the emulsifier,Hilti Concrete Drill Machine Xiao Bian in this side of the classification of some simple and commonly used emulsifier maintenance methods and share: 1, after the completion of production, the emulsifier must be clean, so Both to maintain the efficiency of the rotor can play a role in protecting the emulsifier seal.

If necessary, in the vicinity of the design and installation of a set of cleaning cycle device. 2, the emulsifier to confirm the machine to seal the cooling water, start the motor,Asphalt Compactor Rental and repeatedly asked the motor steering should be consistent with the steering wheel logo to work, is strictly prohibited reverse! 3, the operation found in the shaft there is liquid leakage phenomenon, you must adjust the pressure after the shutdown machine.

4, according to the user's use of different media, import and export filters must be regularly cleaned in order to avoid the amount of feed to reduce the impact of production efficiency. Into the work chamber material must be fluid,Asphalt Concrete Driveway Cost do not allow dry powder, clumps of material directly into the machine, otherwise, will cause boring machine and damage the emulsifier. 5, is strictly prohibited metal scraps or hard to break the debris into the emulsifier working chamber, so as to avoid the work of the stator, rotor and equipment, the devastating damage.

6, in the emulsification machine before the development of the corresponding safety production procedures to ensure the safety of operators and equipment. In the electrical control system users to set the security protection system, and a good and reliable electrical motor grounding device. 7, Silicone For Filling Concrete Cracks the emulsifier to be regularly checked, the rotor, found that wear is too large, should promptly replace the corresponding parts to ensure dispersion, emulsifying effect.